SERVICE

The mold silicone is too thick, that is to say, its viscosity is too large, and the fluidity is too poor. Generally, this is caused because the filler is too thick to reduce the cost of the filler. Slow board knots and even become solids. To solve this problem, we need to use silicone rubber with less viscosity to add less filler when using mold glue; too thick silica gel has poor flowability, and bubbles are not good for operation. The mold coming out is not durable. If you accidentally buy too thick silica gel, you can add the right amount of silicone oil or a special thinner for silica gel.